EMC 3 BRASS GLAND

<> The patented contact system inside the gland allows all degrees of freedom which are neccessary to install a cable easily; the cable can be pulled forward and backward inside the gland without damaging the cable shielding. This is realized by specially designed contact elements. This feature is most advantageous when connectorizing the single cores of the cable.

<> Also the cable can easily be rotated inside the gland without damaging the cable shielding -- most important when installing the gland at an industrial connector. The unique mechanism of the integrated contact system therefore show the following features:

- For small cable diameters in the lower clamping range of the gland the contact system won't touch the cable braiding during the installation process at all. 

- For bigger cable diameters in the upper clamping range of the gland, the contact system will rotate freely inside the gland together with the cable itself. Only when tightening the cap the contact element will be xed and will be pressed against the cable shielding to ensure a low resistance electrical contact between gland and cable braiding. 

<> Simultaneously IP68 protection class and cable anchorage according to the EN 50262 is achieved. This straight forward application and convenient installation of the gland saves a lot of time and therefore a lot of money. 

<> Shielding and derivation tests performed with this gland show exceptional values. So this EMC and derivation gland from Bimed will be used wherever an outstanding performance is needed. 

<> Simple application, fast installation together with the patented contact system makes Bimed's gland unique among the cable glands.

#EMC3CableGlands

#Brass

#EES